Comments on: Cisco 26xx/36xx/72xx Router Simulator (Windows)

By: admin

admin — Thu, 24 Jul 2008 21:41:18 +0000

Siva: The telnet client is not installed by default. Open “Programs and features” in Control Panel -> Choose “Turn Windows features on or off” -> Select “Telnet Client”!

If you have PuTTY installed, you can modify the Dyngen config to launch it instead of telnet.exe.

By: Siva

Siva — Tue, 22 Jul 2008 22:45:02 +0000

Hi,

I have followed everything and i can see the => prompt. However when i try to type console /all command, i get an error message ‘Windows cannot find telnet.make sure you type the name correctly and try again’.

Could u pls help me with this?

Thanks

By: mabika lufuluabo

mabika lufuluabo — Fri, 18 Jul 2008 15:33:51 +0000

Hello Mr.Johan

I installed dynamip on my vista machine. I took a care about the recommandation that you defined.
Ereything is installed but once I tried to start dynamips server but it only started on TCP port 7200 not 7201. The results received from dynamip server and sample_lab internetworkexpert are below. Please, could you help me to fix this situation.

Cisco Router Simulation Platform (version 0.2.8-RC2-x86)
Copyright (c) 2005-2007 Christophe Fillot.
Build date: Nov 9 2007 09:54:39
ILT: loaded table “mips64j” from cache.
ILT: loaded table “mips64e” from cache.
ILT: loaded table “ppc32j” from cache.
ILT: loaded table “ppc32e” from cache.
Hypervisor TCP control server started (port 7200).
Shutdown in progress…
Shutdown completed.
Shutdown in progress…
Shutdown completed.

_______________________________

Reading configuration file…
*** Warning: Could not connect to dynamips server localhost:7201
*** Warning: Connecting R1 S1/0 to FRSW 1 resulted in:
nonexistent device FRSW
*** Warning: Connecting R2 F0/0 to SW2 F1/2 resulted in:
nonexistent device SW2
*** Warning: Connecting R2 S1/0 to FRSW 2 resulted in:
nonexistent device FRSW
*** Warning: Connecting R3 S1/0 to FRSW 3 resulted in:
nonexistent device FRSW
*** Warning: Connecting R3 S1/1 to FRSW 13 resulted in:
nonexistent device FRSW
*** Warning: Connecting R3 E0/1 to SW3 F1/3 resulted in:
nonexistent device SW3
*** Warning: Connecting R4 E0/0 to SW2 F1/4 resulted in:
nonexistent device SW2
*** Warning: Connecting R4 E0/1 to SW4 F1/4 resulted in:
nonexistent device SW4
*** Warning: Connecting R4 S1/0 to FRSW 4 resulted in:
nonexistent device FRSW
*** Warning: Connecting R5 E0/1 to SW3 F1/5 resulted in:
nonexistent device SW3
*** Warning: Connecting R5 S1/0 to FRSW 5 resulted in:
nonexistent device FRSW
*** Warning: Connecting R6 E0/0 to SW2 F1/6 resulted in:
nonexistent device SW2
*** Warning: Connecting R6 E0/1 to SW4 F1/6 resulted in:
nonexistent device SW4
*** Warning: Connecting R6 S1/0 to FRSW 6 resulted in:
nonexistent device FRSW
*** Warning: Connecting SW1 F1/7 to SW2 F1/7 resulted in:
nonexistent device SW2
*** Warning: Connecting SW1 F1/8 to SW2 F1/8 resulted in:
nonexistent device SW2
*** Warning: Connecting SW1 F1/9 to SW2 F1/9 resulted in:
nonexistent device SW2
*** Warning: Connecting SW1 F1/10 to SW3 F1/7 resulted in:
nonexistent device SW3
*** Warning: Connecting SW1 F1/11 to SW3 F1/8 resulted in:
nonexistent device SW3
*** Warning: Connecting SW1 F1/12 to SW3 F1/9 resulted in:
nonexistent device SW3
*** Warning: Connecting SW1 F1/13 to SW4 F1/7 resulted in:
nonexistent device SW4
*** Warning: Connecting SW1 F1/14 to SW4 F1/8 resulted in:
nonexistent device SW4
*** Warning: Connecting SW1 F1/15 to SW4 F1/9 resulted in:
nonexistent device SW4
*** Error: errors during loading of the topology file, please correct them
Press ENTER to continue

Thank you so much

Mabika

By: Edwin

Edwin — Fri, 21 Mar 2008 18:06:36 +0000

Does anybody has cisco image file. I am not Smartnet customer. Can somebody give me an image file pls ,for 7200 i will just want to use it for for my dynagen thankss..

By: Paola Gallegos

Paola Gallegos — Sat, 12 Jan 2008 16:33:46 +0000

Hi, Thank you for the file. Just I can´t create a other session 7201 I can´t I tried to create it in the same way like in WinXp but I couldn´t ..can you help me.

By: sepiraph@hotmail.com

sepiraph@hotmail.com — Thu, 27 Dec 2007 09:36:58 +0000

Hey Johans, thanks for the detailed instruction, works great on my Vista!

By: gaurav

gaurav — Sun, 09 Dec 2007 04:34:52 +0000

Hi!
i have installed dynagen on vista its working thanks. but whenever i try to telnet any router and give the command like “telnet R1″ it shows the message “windows cannot find ‘telnet’ make sure you typed the name correctly,and then try again”.
can u plz. solve my problem thats will be a big favour to me thanks my email addr. is gauravgoyal022@gmail.com thanks very much again

By: Rishi

Rishi — Sun, 02 Dec 2007 03:48:08 +0000

Hi,

I am planning to buy a new Laptop (Dell 1520), 2GB RAM, Intel Core 2 Duo with Windows Vista Home Premium on it.

Is this configuration good for running DYNAGEN (6 38xx routers and 4 3500 switches)?

I came to know from my friends that Vista is not recomented for Dynagen. Is it True??

If I need to order the addtional RAM, Please advice.

By: khan

khan — Sat, 10 Nov 2007 21:48:45 +0000

Hi,

I am facing a problem with saving my running configurations in Vista, I changed priviles of Dynamips folder to give full permission to the user, still I cannot save my running config.

In IOS I get no erros with write mem
but when I stop and start the router, config is defaulting to whatever configuration is in network. initial folder.

Help is appreciated.

By: admin

admin — Sat, 20 Oct 2007 01:42:22 +0000

Sorry, I’m still running 0.9.2 on my Vista machine. It works great.